How to Put an Overgrip on a Tennis Racquet

Learn how to put an overgrip on a tennis racquet with this quick and easy guide. With just a few simple steps, you’ll have a better grip on your game in no time!

What is an overgrip?

An overgrip is a thin piece of rubber that is wrapped around the handle of a tennis racquet. It provides extra cushioning and grip, and it can help to absorb perspiration. Overgrips are available in a variety of colors, thicknesses, and textures. They are easy to put on and take off, and they can be replaced as needed.

To put an overgrip on your racquet, start by peeling the backing off of the overgrip. Then, wrap the overgrip around the handle of the racquet, starting at the bottom and working your way up. Make sure that the overgrip is snug but not too tight. Once you reach the top of the handle, use a small piece of tape to secure the overgrip in place.

If you have never used an overgrip before, or if you are unsure about how to put one on, you can always ask a salesperson at your local tennis shop for help.

Benefits of an overgrip

Adding an overgrip to your tennis racquet offers many potential benefits. First, it can increase the overall size of the grip, making it more comfortable for those with large hands. Second, it can help to absorb sweat and keep your grip dry and slip-free. Third, it can add extra cushioning and shock absorption, making your racquet more forgiving on your arm and wrist. And finally, it can simply add a bit of color or personality to your racquet!

How to put an overgrip on a tennis racquet

Putting an overgrip on a tennis racquet is not difficult, and it can be done in a few simple steps. By adding an overgrip, you will be able to improve your grip on the racquet, which can help you improve your game.

Step 1: Remove the old overgrip

The first step is to remove the old overgrip. You can do this by either peeling it off or cutting it off with a sharp knife. If you are going to reuse the old overgrip, be very careful not to damage the racquet handle.

Next, clean the area where the overgrip will be applied. This can be done with rubbing alcohol or another suitable cleaning agent. Make sure that the area is completely dry before proceeding to the next step.

Step 2: Place the new overgrip on the racquet

To begin, place the new overgrip on the tennis racquet so that the sticky side is facing down. The overgrip should be positioned near the top of the racquet handle. Once you have found the correct placement, gently press down on the overgrip to secure it in place.

Step 3: Start at the bottom and work your way up

For this step, you will need to start at the bottom of the racket handle and work your way up. It is important to make sure that you start at the bottom so that the overgrip is evenly distributed along the length of the handle. Slowly and carefully stretch the overgrip until it is tight against the racket handle. Once you reach the top, you can trim off any excess material with a sharp knife or scissors.

Step 4: Trim the overgrip

Overgrip
4. Trim the overgrip With a razor blade or scissors, cut off the excess overgrip, leaving about 1/8 inch (3 mm) from the top of the grip. If you’re using adhesive tape, be sure to leave enough overhang to comfortably wrap around the bottom of the grip.

How to care for your overgrip

Once you’ve installed your overgrip, you’ll need to take care of it to ensure that it lasts as long as possible. Here are a few tips:

-Wipe down your overgrip after each use with a damp cloth to remove sweat and dirt.
-Store your overgrip in a cool, dry place when not in use.
-Be careful not to expose your overgrip to excessive heat, as this can cause it to deteriorate.
-Replace your overgrip when it starts to show signs of wear, such as cracks or fraying.

Tips for choosing the right overgrip

Choosing the right overgrip can be tricky. There are so many different types, textures and colors to choose from! Here are a few tips to help you select the perfect overgrip for your racquet:

-Texture: The first thing you’ll want to consider is the texture of the overgrip. Do you want a smooth or tacky feel? Smooth grips are typically made of synthetic materials, like polyurethane, and provide good grip without being too sticky. Tacky grips are usually made of natural rubber and offer a grippier feel.

-Thickness: Overgrips come in varying thicknesses, from thin ( around 0.5 mm) to thick ( 1.8 mm). If you’re not sure which thickness is right for you, it’s usually best to go with a thinner grip. Thicker grips can add weight to your racquet and make it feel bulky.

-Color: Overgrips come in all sorts of colors, so you can definitely find one that matches your style! Just keep in mind that darker colors will tend to shows signs of wear more quickly than lighter colors.

Once you’ve decided on the perfect overgrip, putting it on is easy! Just follow these steps:

1.Start by removing the old grip from your racquet. You can do this by either peeling it off or using grip solvent (available at most sporting goods stores).

2.Cut the new grip to size, if necessary. Most overgrips come in pre-cut lengths, but if you’re using a roll of grip tape, you’ll need to cut it to size with a sharp knife or scissors.

3.Apply double-sided adhesive tape to the bottom of the new grip. This will help keep the grip in place as you put it on.

4.Starting at the bottom of the handle, begin wrapping the new grip around the handle, applying light pressure as you go. You’ll want to wrap it tightly enough so that it doesn’t slip, but not so tight that it’s uncomfortable to hold. Stop wrapping when you reach the top of the handle (or when you run out of grip!). If there’s any adhesive tape still showing, cut it off with a sharp knife or scissors