How Do You Soften Up A Baseball Glove?

One of the most frequently asked questions we get here at JustBats.com is, “How do you soften up a baseball glove?” In this blog post, we’ll answer that question and give you some tips on how to break in your new glove.

Soaking the Glove

There are a few ways that you can soften up a baseball glove. One way is to soak the glove in water overnight. This will help to break down the leather and make it more pliable. You can also try using a glove steamer which will help to loosen the fibers in the leather and make the glove more flexible.

Fill a sink or bucket with lukewarm water

Before you start breaking in your new leather baseball glove, you’ll need to soften it up. You can do this by soaking your glove in lukewarm water for about 20 minutes.

This will help to open up the pores of the leather so that it can better mold to your hand. Make sure that you don’t use hot water, as this can damage the leather. Once you’ve soaked your glove, wring it out so that it’s just damp and not dripping wet.

Submerge the glove in the water

Find a bucket, sink, or other container that can completely submerge the baseball glove. Fill the container with lukewarm water until the glove is completely covered. Let the glove soak for 30 minutes to 1 hour.

Leave the glove to soak for 30 minutes

After you have formed the pocket of the glove, it is now time to break-in or soften the leather. The easiest way to do this is to soak your baseball glove in water for 30 minutes. You can do this by either submerging the entire glove in a bucket of water or by holding the glove under a running faucet. Make sure that the water soaks through to the inside of the glove.

Applying a Conditioner

A baseball glove is an essential piece of equipment for any ballplayer. It is important to take care of your glove so it will last for many seasons. When you first get your glove, it will be stiff and need to be broken in. You can do this by applying a conditioner to the leather. This will help to soften up the glove and make it more pliable.

Apply a generous amount of conditioner to the glove

When you first get your baseball glove, it will be stiff and the leather will be dry. To soften up the leather and make the glove more flexible, you will need to condition it. Apply a generous amount of conditioner to the glove, working it into the leather with your fingers. Be sure to get the conditioner into all the nooks and crannies, especially around the fingers. Once you have conditioned the glove, put a ball inside and bend and twist the glove in every direction to work the conditioner into the leather even further.

Rub the conditioner into the glove

Next, use a clean rag to work the conditioner into the glove. You’ll want to work it into all of the nooks and crannies, especially if you have an older glove. Once you’ve worked the conditioner into the glove, set it aside and let it sit for a few minutes so that the leather can absorb the conditioner.

Leave the conditioner on the glove for 30 minutes

After you have applied the conditioner to your baseball glove, you will need to leave it on the glove for 30 minutes in order to allow the leather to absorb the moisture.

Drying the Glove

There are a few ways that you can soften up a baseball glove. One way is to ditch the glove in your oven on a low temperature for about an hour. This will help the leather to loosen up and become more pliable. You can also try breaking in the glove by repeatedly bending it back and forth.

Use a towel to remove any excess water from the glove

After you’ve rinsed the glove, use a towel to remove any excess water from the glove. Then, open up the glove and let it air dry for a day or two in a warm, dry place. You can speed up the drying process by using a fan or hair dryer on the low setting.

Place the glove in a well-ventilated area to dry

Once you have removed all the dirt and grime from your baseball glove, it is time to dry it out. Place the glove in a well-ventilated area where it will not be disturbed. A good place to dry your glove is on a clothesline or over an air vent. You can also lay the glove on a towel on the floor or over a chair. Be sure tostuff the glove with newspaper so that it keeps its shape while drying.

Allow the glove to air dry for 24 hours

After you’ve used a leather conditioner on your baseball glove, the next step is to allow the glove to air dry. This will help to ensure that the leather remains soft and supple. Place the glove in a well-ventilated area, such as on a clothesline or over a fan, and allow it to dry for 24 hours.