How Many Feet of String Do You Need to String a Tennis Racquet?

How many feet of string do you need to string a tennis racquet? It really depends on the size of the racquet and the tension you want to string it at. A general rule of thumb is that you’ll need about 40 feet of string for a standard-sized racquet.

Introduction

When it comes to stringing a tennis racquet, the type of string you use will have the biggest impact on performance. However, the length of the string also plays a role. If you string your own racquets or are thinking about doing so, it’s important to understand how different string lengths can affect playability.

In general, longer strings provide more power and spin potential, while shorter strings offer more control. The length of the string bed (the part of the racquet that actually comes into contact with the ball) is directly related to the length of the strings. The standard length for a tennis racquet is 27 inches (68.58 cm). String beds can range from about 25 inches (63.5 cm) for junior racquets to 29 inches (73.66 cm) for adult rackets. Most adult players opt for a 27-inch (68.58-cm) string bed because it provides a good balance of power and control.

If you’re looking for more power from your strokes, you might want to try a longer string bed. For example, going from a 27-inch (68.58-cm) string bed to a 28-inch (71.12-cm) bed will give you about 4 percent more surface area to hit with. This can add up to quite a bit more power, especially on serves and groundstrokes. Of course, with that extra power comes some loss of control, so it’s important to experiment with different string lengths to find what works best for your game.

If you’re looking for more control, on the other hand, you might want to try a shorter string bed. For example, going from a 27-inch (68.58-cm) bed to a 26-inch (66.04-cm) bed will give you about 2 percent less surface area to hit with. This can lead to fewer errors on your strokes as well as more consistent ball placement

The Basic Formula

If you’re new to stringing, or just need a refresher, here’s the basic formula for how much string you’ll need to string a tennis racquet:

For a standard length racquet (27 inches / 68.58 cm), you’ll need:
– 38 feet / 11.58 meters of string for a standard 16 x 18 string pattern
– 40 feet / 12.19 meters of string for an oversize or extended length racket

Stringing a Tennis Racquet

You will need about 40 to 50 feet of string to string a standard tennis racquet. The process is simple and only requires a few tools. You will need a Racquet, String, Stringing Machine, and Stringing tension. You can find all of these things at your local sporting goods store.

Step One: Determine the Length of the String

Determining the amount of string you need is simple arithmetic. Just multiply the length (in inches) of the racket by the width ( also in inches). The resulting number is how many square inches of string you will need. Since a full set of tennis strings comes as one continuous length, you will also need to know the end-to-end or “butt” length of your racket in order to determine how much string you need to purchase.

Step Two: String the Racquet

Now that you have all of your equipment, it’s time to string the racquet. You will need to gather the following materials:
-One roll of string
-A tennis racquet
-A pair of pliers
-A ruler or tape measure

First, you will need to cut the string. Using the ruler or tape measure, measure out 36 feet of string. Cut the string at this point and set it aside. Next, take the pliers and carefully remove the old strings from the racket. Once all of the old strings are out, you can begin threading the new string through the racket. Start at one end of the frame and work your way around, until you reach the other end. Make sure that the string is tight as you go. When you reach the end, tie a knot in the string to secure it in place. Finally, cut off any excess string and clip any loose ends. Your racket is now ready to use!

Step Three: Cut the String

Next, you will need to cut the string. There are two ways to do this: with a sharp knife or with scissors. If you are using a sharp knife, be very careful not to cut yourself. If you are using scissors, make sure they are sharp so that you can get a clean cut.

Cutting the string is easy. First, find the end of the string that is not attached to the spool. Second, measure out how much string you need by holding it up to the racquet frame and estimating how many times you will need to wrap it around the frame. Once you have measured out the correct amount of string, simply cut it off at that point.

If you are unsure of how much string you need, a good rule of thumb is to start with about 20 feet (6 meters) of string for a standard-sized racquet. This should be enough to complete the job, but if you find that you need more, simply cut off another length of string and continue until the job is finished.

Conclusion

It really depends on the size of the racquet and how much string you need. For a standard sized tennis racquet, you will need about 40 feet of string. For a large tennis racquet, you will need about 60 feet of string.