How to Make a Homemade Baseball Tee

Check out this easy to follow tutorial on how to make a homemade baseball tee. All you need is a t-shirt and some string!

Introduction

Homemade baseball tees are a fun and easy project that you can make for yourself or as a gift for someone else. All you need is a few yards of fabric, some batting, and a little bit of time. With a little bit of effort, you can create a shirt that looks just like the ones the pros wear!

Here are the supplies you’ll need to make your own homemade baseball tee:

-3 yards of fabric (preferably cotton jersey)
-1 pound of batting
-sewing machine
-scissors
-pins
-ruler or measuring tape

First, cut your fabric into three equal pieces. Each piece should be about 36 inches long. Then, fold each piece in half so that the wrong sides are together. Pin the three pieces of fabric together at the side edges and bottom edges.

Materials

You will need a white t-shirt, a black sharpie, and a piece of cardboard. Lay the shirt out flat on a surface. Place the piece of cardboard inside the shirt so that it is between the layers of fabric. This will prevent the Sharpie from bleeding through to the back of the shirt.

You will need a plain white t-shirt, a black sharpie, and a piece of cardboard

To make your own baseball tee, you’ll need a plain white t-shirt, a black sharpie, and a piece of cardboard. First, lay the t-shirt flat on a surface. Then, use the sharpie to draw a horizontal line across the center of the shirt. This will be the hemline of your baseball tee. Next, use the cardboard to trace a semi-circle around the neckline of the shirt. Cut out the semi-circle, and then cut along the horizontal line you drew earlier. Finally, turn the shirt inside out and use a hot iron to press down on all of the raw edges. And that’s it! Your very own homemade baseball tee is now ready to wear.

Instructions

You will need the following supplies: a white T-shirt, black sharpie, scissors, duct tape, and a baseball. First, lay the T-shirt flat on a surface. Second, use the sharpie to draw a baseball diamond on the front of the T-shirt. Third, cut out the diamond shape. Fourth, place the duct tape around the outside of the diamond. Fifth, place the baseball in the center of the duct tape.

First, take your piece of cardboard and cut it into a rectangle that will fit comfortably inside your t-shirt.

First, take your piece of cardboard and cut it into a rectangle that will fit comfortably inside your t-shirt. Then, use a pen or pencil to draw a baseball Diamond onto the cardboard. Next, cut out the diamond shape that you just drew. Now, you should have a piece of cardboard in the shape of a baseball diamond.

Now, take your scissors and cut along the outside edge of the Diamond shape. Be sure to cut through both layers of the cardboard. Once you have finished cutting, you should have a piece that looks like a baseball diamond with jagged edges.

Now, it’s time to decorate your homemade baseball tee! You can use markers, paint, or even glue on some real baseball diamonds to make it look more realistic. Be creative! When you’re finished decorating, put the piece of cardboard inside your t-shirt and enjoy your new creation!

Next, use the black sharpie to draw a baseball diamond onto the piece of cardboard.

After you have drawn the baseball diamond, use the scissors to cut out the home plate, three bases, and the pitcher’s mound. You can make the bases and home plate whatever size you want. Once you have cut out all the pieces, set them aside for now.

Once you have drawn the baseball diamond, cut it out with scissors.

Get a white T-shirt and lay it out flat. Use a pencil to draw a baseball diamond on the front of the shirt. The home plate should be near the bottom of the shirt, and the first and third base lines should be near the sides of the shirt. You can make the diamond as big or small as you want, but keep in mind that it will be reversed when you wear the shirt, so don’t make it too close to the edges.

Once you have drawn the baseball diamond, cut it out with scissors. Make sure not to cut too close to the lines, or your design will be ruined.

Now you need to make the “seams” on the baseball. Cut four thin strips of black fabric, each about 2 inches long. Sew two of the strips together at one end, then sew the other two strips together at one end. These will be your “seams”.

Pin the “seams” onto the shirt so that they are evenly spaced around the edge of the cut-out diamond. Sew them onto the shirt using a sewing machine or needle and thread.

Now you just need to add some finishing touches to your homemade baseball tee! Use a white fabric pen or paint to add stitches around the edge of the cut-out diamond. You can also add a number to your tee if you want. Finally, cut out a small circle from black fabric and sew it onto the shirt for a button.

Conclusion

Now that you know how to make a homemade baseball tee, it’s time to put your skills to the test. You can use this tee to show your support for your favorite team, or you can use it as a unique and stylish piece of clothing to wear out on the town. No matter how you choose to wear it, you’ll be sure to turn heads and get compliments.