How to Make Your Own WWE Raw Stage

Looking to add a little extra excitement to your WWE Raw viewing experience? Why not make your own Raw stage? With a few simple supplies and a little bit of creativity, you can have your own WWE Raw stage that will be the envy of all your friends. Here’s how:

Choose Your Materials

When it comes to making your own WWE Raw stage, you have a few different options for materials. You can use cardboard, wood, or even PVC pipe. If you want to make a more permanent stage, you can use wood or PVC pipe. But if you’re just looking to make a quick and easy stage, cardboard is the way to go. Let’s take a look at how to make a cardboard WWE Raw stage.

PVC pipes

You can use any type of PVC pipe you want for your WWE Raw stage. The most important thing is to make sure that the pipes are strong enough to support the weight of the wrestlers and the rig. You can get PVC pipes in different diameters, so make sure to choose the right size for your needs. You will also need PVC connectors to join the pipes together.

Plywood

Plywood is an ideal material for making your own WWE Raw stage, as it is strong and durable yet relatively lightweight. You will need four sheets of plywood, each 8 feet (2.4 m) long and 4 feet (1.2 m) wide.Choose plywood that is 3/4 inch (1.9 cm) thick for the best durability.

2x4s

2x4s are the most commonly used lumber for building projects. They’re affordable, readily available, and easy to work with. We’ll use 2x4s for the frame of our stage, as well as for the supports that will hold up the platform. You’ll need 8 2x4s, each 8 feet long.

Screws

When it comes to screws, there are a few things you need to keep in mind. First, you need to make sure that the screws you choose are the right size for the task at hand. Second, you need to make sure that the screws are compatible with the materials you’re using. For example, if you’re working with wood, you’ll need to use wood screws. If you’re working with metal, you’ll need to use metal screws.

Third, you need to make sure that the screws are strong enough for the job. This is particularly important if you’re going to be using the screws to hold together heavy pieces of material. fourth, you need to make sure that the screws are durable and will not rust or corrode over time. If you’re using them outdoors, this is especially important. fifth and finally, you need to make sure that the screws are easy to remove when necessary. This is important for any number of reasons, including repairs and renovations.

Nuts and bolts

In order to make your own WWE Raw stage, you will need a few materials. You will need:

-Plywood
-2x4s
-Hammer
-Nails
– saw

Tape

The first step to making your own WWE Raw stage is to gather your materials. You will need:

-Tape (we recommend duct tape or gaffer’s tape)
-Plywood or particle board (you will need enough to cover your desired stage area)
-Paint or contact paper (optional)

Once you have gathered your materials, you are ready to begin construction!

Paint

Raw’s stage is constantly evolving. Sometimes it’s inspired by a recent pay-per-view, while other times it changes with the times. For example, when The Attitude Era was at its peak, the Raw set featured a lot of neon lights. These days, it’s a little more subdued.

If you want to make your own WWE Raw stage, you’re going to need some supplies. For the most part, you can find everything you need at your local hardware store. Here’s what you’ll need:
-Paint: You’ll need black paint for the ring ropes and red paint for the turnbuckles. You can use any brand of paint, but we recommend using Rust-Oleum Universal All Surface Spray Paint. It’s easy to use and it comes in a variety of colors.
-Canvas: We recommend using a 10 oz. cotton duck canvas. It’s durable and it won’t stretch or shrink when you paint it.
-Plywood: You’ll need two pieces of 3/4″ plywood for the base of the stage. We recommend using sanded plywood because it’s smooth and it won’t splinter when you cut it.
-PVC pipe: You’ll need 10′ of 1″ PVC pipe for the ring posts. You can find this at your local hardware store or online at Amazon.com.
-PVC fittings: You’ll need two 90-degree elbow fittings and two T-fittings for the ring posts. Again, you can find these at your local hardware store or online at Amazon.com

Cut the PVC Pipes

Mark where you want to cut the PVC pipes. It is important to make sure that the pipes are even. If they are not, the stage will not be level. Cut the pipes with a saw.

Decide on the dimensions of your stage

When you’re planning to build a WWE Raw stage, there are a few things you need to take into consideration. The first is the size of the stage. It’s important to have a good idea of how big you want your stage to be before you start cutting any PVC pipe.

The second thing you need to think about is the height of the stage. You want your stage to be tall enough that the wrestlers can perform their signature moves, but not so tall that it’s unsafe.

Once you have an idea of the dimensions of your stage, you can start cutting the PVC pipe. Remember to wear safety goggles and gloves when working with PVC pipe.

Cut the PVC pipes to size

Now that you have all of your PVC pipes, you will need to cut them to the correct size. You can do this with a hand saw or a power saw, but make sure that the cuts are straight. If they are not, the stage will not be level and stable.

When you have finished cutting the pipes, you will need to sand the edges until they are smooth. This will prevent anyone from getting hurt if they accidentally bump into the stage.

Assemble the Frame

Using 4″x4″ lumber, construct a frame that is 9′ wide and 8′ tall. This will be the basic frame for your stage. You will want to make sure that the frame is sturdy and stable. Once you have the frame built, you can begin to add the plywood.

Assemble the frame of your stage using the PVC pipes and screws

Use the PVC pipes and screws to assemble the frame of your stage. Make sure that the pipes are screwed in tightly so that the frame is sturdy and will not collapse.

Attach the Plywood

Cut the 3/4″ plywood into six pieces – two 8′ x 4′ pieces, two 4′ x 4′ pieces, and two 2′ x 4′ pieces. These will be the six panels that make up the Raw stage. Next, find the center of each 8′ piece and make a mark.

Cover the frame of your stage with plywood

Now that the frame of your stage is complete, it’s time to cover it with plywood. This will give the stage a solid surface to stand on and will make it more durable. You will need to purchase enough plywood to cover the entire frame, plus an additional piece for the ramp.

Cut the plywood into pieces that are slightly smaller than the dimensions of your frame. For example, if your frame is 8 feet wide by 4 feet deep, you will want to cut your plywood sheets into pieces that are 7 feet 10 inches wide by 3 feet 10 inches deep. This will allow the plywood to fit snugly into the frame.

Once you have cut all of your pieces, start attaching them to the frame one at a time using screws. Be sure to predrill holes in the plywood before screwing it in place, as this will make it easier and will help prevent the wood from splitting. Work your way around the frame until all of the pieces are in place.

Paint and Decorate

You will need some supplies before you start painting and decorating your WWE Raw stage. You will need a few cans of spray paint, some fabric, and some cardboard. You will also need some tape, scissors, and a pencil. Once you have all of your supplies, you can start painting and decorating your stage.

Paint and decorate your stage however you like!

You can use any kind of paint you like to decorate your WWE Raw stage, but we recommend using acrylic paint because it’s easy to clean up and it dries quickly. You can find acrylic paint at most craft stores.

Decorate your stage with whatever design you like! You could make it look like your favorite WWE Superstar’s entrance ramp, or you could come up with your own original design. Be creative!

Once you’re finished painting, let your stage dry completely before moving on to the next step.