How To Oil An Old Baseball Glove?

While some people may think that oiling a baseball glove is not necessary, it can actually help the glove last longer. If you have an older baseball glove, you may be wondering how to oil it. Here is a quick guide on how to oil an old baseball glove.

Introduction

As baseball gloves get older, they may become stiff and hard to break in. Oiling your glove regularly will help keep it supple and prevent it from drying out and cracking. It’s important to use the right kind of oil, however, as some oils can actually damage the leather. Here’s a guide on how to oil an old baseball glove the right way.

##The Best Way To Oil An Old Baseball Glove
What You’ll Need:
-A clean cloth
-Saddle soap
-Olive oil or neatsfoot oil
-Water
-A hairdryer (optional)

Instructions:
1. Start by cleaning your glove with saddle soap. This will remove any dirt or grime that’s built up on the leather. Be sure to work the saddle soap into all nooks and crannies, including the stitching. Rinse the soap off with water and dry the glove with a clean cloth.
2. Apply a small amount of olive oil or neatsfoot oil to a clean cloth. Rub the oil into the leather, being sure to work it into all of the creases and folds. You don’t want to saturate the leather, just apply enough so that it’s visibly shiny. The best way to do this is to put a small amount on your cloth and then rub it into the glove until it’s absorbed.
3. Once you’ve applied the oil, you can optionally use a hairdryer on low heat to help it penetrate deeper into the leather.
4. Allow the glove to dry overnight before using it again. Repeat this process every few months or as needed to keep your glove in good condition

What You Need

Before you begin, make sure you have the following materials:
-A clean, dry cloth
-A can of glove oil (available at most sporting goods stores)
-A small brush (optional)

##Instructions
1.Start by using the dry cloth to wipe down the outside of your glove. Remove any dirt or debris that might be on the surface.
2.Open the can of glove oil and generously apply it to the inside of the glove. Use your fingers to work the oil into the leather, making sure to cover all of the surfaces.
3.If you have a small brush, you can use it to help spread the oil evenly throughout the glove.
4.Once you’ve thoroughly covered the inside of the glove with oil, use the dry cloth to wipe away any excess. Be sure to pay special attention to the stitching, as this is an area that can easily dry out and crack over time.
5.Leave your glove overnight to allow the oil to fully absorb into the leather. Once it’s had time to soak in, your glove will be soft, supple, and ready for action!

Preparing The Glove

Start by removing any debris from the glove, such as dirt or old residue. Next, wet a clean cloth with warm water and spot-clean the glove to remove any lingering dirt. Once the glove is clean, dry it off with a towel.

Now that the glove is clean and dry, you’re ready to oil it. Apply a small amount of glove oil to your fingers and rub it into the leather. Be sure to cover the entire surface of the glove, paying special attention to areas that seem dry or cracks. Once you’ve applied the oil, work it into the leather by bending and flexing the glove. This helps the oil penetrate deep into the leather, keeping it soft and supple.

Oiling The Glove

Oiling a baseball glove is important to do periodically in order to keep the glove soft, supple, and pliable. It is recommended that you oil your glove about once a month, or after every 5-10 uses. Oiling your glove will also help it last longer by preventing it from drying out and cracking.

There are a few different ways that you can oil your baseball glove:

-You can use a commercial leather conditioner or saddle soap. Follow the instructions on the product label.

-You can also make your own leather conditioner by mixing 1 part vinegar with 2 parts olive oil. Apply this mixture to your glove with a clean cloth and rub it in well. Allow the conditioner to soak into the leather for at least 15 minutes before wiping off any excess.

-Another option is to use a natural oil such as jojoba oil, linseed oil, or neatsfoot oil. Apply the oil to your glove with a clean cloth and rub it in well. Allow the oil to soak into the leather for at least 15 minutes before wiping off any excess.

Letting The Glove Dry

Once you have cleaned your glove, you will need to let it dry. If you do not let the glove dry properly, the oil will not be able to penetrate the leather and condition it. A good way to let your glove dry is to stuff it with paper towels or old rags. This will help the glove keep its shape as it dries. Once the glove is dry, you will be able to move on to the next step.

Conclusion

Oiling your baseball glove is important to maintaining the quality of the leather. It keeps the glove supple, soft, and looking new for a longer period of time. Many people swear by using a certain type or brand of oil, but in reality, any kind of leather conditioner or oil will do the trick. All you need to do is apply a small amount to a clean cloth and rub it into the leather in a circular motion. Be sure to get into all the nooks and crannies, and don’t forget the laces! Once you’re done, buff the excess oil off with another clean cloth.