How to Put On a Tennis Overgrip

Wondering how to put on a tennis overgrip? Here’s a quick and easy guide that’ll have you doing it like a pro in no time!

Why You Should Overgrip Your Tennis Racquet

If you play tennis, you know that an overgrip is important. An overgrip provides extra cushioning and grip on your tennis racquet. It also absorbs sweat and provides extra comfort. Overgripping your tennis racquet can also help prevent blisters. In this article, we’ll show you how to put on a tennis overgrip.

More Tack = More Spin

You’ve probably heard some of the pros talk about “putting tack on their racquet” or “getting more spin with an overgrip.” It’s not just talk—there is a real advantage to using an overgrip, and it has to do with the amount of friction between your grip and the ball.

When you grip the ball correctly, you want just enough friction to keep the ball from slipping, but not so much that it impedes your swing. The same principles apply to your tennis racquet. An overgrip provides just enough extra friction to allow you to really put a spin on the ball without sacrificing power or control.

If you find that your racquet is slipping in your hand, especially during hot and humid weather, an overgrip can help you keep a firm grip on your racquet. They are also great for players who tend to sweat a lot, as they absorb moisture and help keep your hand dry.

Overgrips are inexpensive and easy to install, so there is no excuse not to give them a try!

Overgripping Adds Weight to the Racquet

One of the main reasons players choose to overgrip their racquets is because it adds weight to the racquet. This can be beneficial for players who find their racquet is too light and difficult to control. By adding an overgrip, you can add weight without having to buy a new, heavier racquet.

Overgripping also increases the size of the grip, which can be beneficial for players with smaller hands. A larger grip can help you maintain a secure grip on your racquet during intense rallies and serves.

In addition to adding weight and increasing the size of the grip, overgripping can also add absorbency to your grip. This can be especially beneficial in hot weather conditions when your hands tend to sweat more. By absorbing sweat, an overgrip can help you keep your grip dry and prevent your hand from slipping on the handle.

Overgripping Lengthens the Handle

Overgripping your tennis racket is beneficial because it lengthens the handle. By lengthening the handle, you increase the leverage that you have on the racket, making it easier to swing. This can be helpful if you have arthritis or joint pain because it puts less stress on your joints. In addition, overgripping can help if you have grip strength issues.

How to Overgrip Your Tennis Racquet

Overgripping your tennis racquet can give you a better grip on the handle and help you sweat less during intense matches. It can also add some extra weight to the racquet, which can help with power. Overgripping is a simple process, but there are a few things you need to keep in mind. Let’s get started.

Step One: Remove the Old Overgrip

Use an overgrip removal tool, or a sharp object such as a knife or a key, to loosen and remove the old overgrip. If you are reusing your old overgrip, make sure to clean it of any dirt or debris.

Step Two: Place the New Overgrip
Start by aligning the end of the new overgrip with the top of the racquet handle. For an accurate placement, use an overgrip installation tool or a length of string to hold the overgrip in place. Slowly wrap the overgrip around the handle, making sure that it is evenly placed.

Step Three: Finish Wrapping the Overgrip
When you reach the end of the handle, trim off any excess overgrip with a sharp knife or scissors. Make sure not to cut too close to the end of the handle, as this can cause fraying.

Step Two: Wrap the New Overgrip

Now that the old overgrip has been removed, it’s time to apply the new one. Start by unscrewing the cap at the bottom of the overgrip. This will expose the adhesive strip. Slowly peel back the adhesive until about two inches of it are exposed.

Position the overgrip so that the exposed adhesive is facing downwards, and begin wrapping it around the top of your racquet handle. Make sure to wrap it tightly and evenly. Once you reach the end of the handle, cut off any excess overgrip with a sharp knife or scissors.

Finally, screw the cap back on to secure the overgrip in place. You’re now ready to hit the court!

Step Three: Trim the Excess Overgrip

Now that the overgrip is in place, you’ll need to trim the excess. Leave about an inch (2.5 cm) of overgrip hanging off the end of the grip, then use a sharp knife or scissors to cut it cleanly. Be sure to cut perpendicular to the length of the overgrip, not at an angle.

Overgrip Materials

Overgrips are available in a variety of materials, each with its own unique properties. Common materials used in overgrips include leather, cloth, foam, and rubber. Leather overgrips are the most absorbent and offer the best feel, while foam and rubber overgrips are the least absorbent but provide the best grip.

Synthetic Overgrips

There are three main types of synthetic overgrips:
-Polyurethane (PU): These overgrips are made from a type of plastic that is soft and tacky, making them very comfortable to use. They are also quite durable and provide good absorbency.
-Rubber: Rubber overgrips are usually made from silicone, which is a very strong and durable material. They provide good absorption and are quite comfortable to use, but can be a bit slippery.
-Nylon: Nylon overgrips are the cheapest and most widely available type of synthetic overgrip. They are not as absorbent or comfortable as PU or rubber overgrips, but they are very easy to put on and take off.

Leather Overgrips

Leather overgrips are the most traditional and classic type of overgrip. They provide a great deal of comfort and absorb sweat very well. Leather overgrips also tend to last longer than other types of overgrips. However, they can be more expensive than other options and may require more frequent replacement.

Pros:

-Comfortable
-Absorb sweat well
-Durable

Cons:

-More expensive than other options
-May require more frequent replacement

Hybrid Overgrips

Hybrid overgrips are made from a mix of materials, usually silicone and polyurethane. They provide a balance of tackiness and durability. They’re a good choice for players who want an overgrip that will last longer than a grip made from one material alone.

Tennis players often use hybrid overgrips in combination with an underwrap. An underwrap is a thin strip of material, usually cloth, that’s placed under the overgrip. It helps prevent the overgrip from slipping and also provides some cushioning.