How to Shrink Baseball Pants the Right Way
Contents
If you are looking to shrink your baseball pants to fit better, then you have come to the right place. In this blog post, we will show you the right way to shrink your baseball pants so that they fit you perfectly.
Introduction
One day you wake up and your favorite pair of vintage baseball pants from last season no longer fit. Either you’ve lost weight, or they’ve stretched out from all the wear and tear. Regardless of the cause, you need to know how to shrink baseball pants before you can take the field again this season. This guide will show you how to shrink baseball pants the right way so that they fit like they did when you first bought them.
There are two main methods for shrinking baseball pants: washing them in hot water or drying them on high heat. We recommend washing them in hot water, as this will not only shrink the fabric, but also remove any dirt and grime that has built up over the course of the season. To do this, simply put your baseball pants in the washing machine on the hot setting and wash them like you would any other piece of clothing.
Once the cycle is complete, remove your pants from the washing machine and put them in the dryer on high heat. Again, this will shrink the fabric and remove any remaining dirt and grime. Once they’re done drying, try them on to see if they fit properly. If they’re still too large, repeat the process until they’re the perfect size.
And that’s all there is to it! By following these simple instructions, you’ll be able to shrink your baseball pants so that they fit like new again.
What You’ll Need
-2 tablespoons of salt
-A pot of boiling water
-Your baseball pants
-A pair of jeans that fit you well (optional)
##Instructions
1. Fill a pot with enough water to cover your baseball pants when they are submerged. Add two tablespoons of salt to the water.
2. Boil the water and then turn off the heat. Submerge your baseball pants in the water and let them soak for 30 minutes.
3. Remove your baseball pants from the water and put them on. If you have a pair of jeans that fit you well, put those on too.
4. Turn on a hairdryer and hold it close to your pants, moving it around so that the hot air shrinks the fabric evenly. Alternatively, you can put your pants in the dryer on high heat for 10-15 minutes.
Step One: Try Them On
The first step to shrinking baseball pants is to try them on. This will give you a good idea of how much they need to be shrunk. If they are too big, you may need to wash them more than once. If they are too small, you may not need to wash them at all.
Step Two: Wet Them Down
Once you have determined how much you need to shrink your pants, wet them down. You can do this by either soaking them in water or by spraying them with a water bottle.
Step Three: Put Them In The Dryer
After you have wet your pants down, put them in the dryer on high heat. Let them dry for about 30 minutes or until they are the desired size.
Step Four: Try Them On Again
After you have shrunk your pants in the dryer, try them on again. If they are still too big, repeat steps two through four until they are the desired size.
Step Two: Trim the Excess Material
Next, you will need to trim the excess material from the baseball pants. You can do this by using a pair of scissors or a rotary cutter. Be sure to leave enough material so that the pants will still fit comfortably around your child’s waist.
Once you have trimmed the excess material, you will need to sew a new seam across the bottom of the pants. You can do this by hand or with a sewing machine. Be sure to use a strong thread so that the new seam will not come undone.
After you have sewn the new seam, you will need to try on the baseball pants to make sure that they fit properly. If they are too loose, you can repeat steps two and three until they fit the way you want them to.
Step Three: Sew the New Hem
After you have cut and pinned your new hem, it is time to sew it into place. You will want to use a sewing machine for this step, as hand sewing will not be sturdy enough to stand up to the wear and tear of a baseball season.
To sew your new hem, start by threading your machine with a strong thread, such as polyester thread. Cotton thread may break more easily when put under stress. Once your machine is threaded, set it to a straight stitch. You do not need to use a zigzag stitch or any other decorative stitches.
After you have set your stitch, sew along the inside edge of your fold. Start at the edge of the fabric and sew slowly towards the pants leg. As you approach the pant leg, you will want to curve your stitches so that they follow the shape of the pants leg. This will ensure that your hem lays flat when you are finished.
Once you have reached the end of the fabric, cut your thread and remove your pants from the machine.
Step Four: Try Them On Again
Now that you’ve let your baseball pants air dry, it’s time to see if they fit the way you want them to. If not, you can always repeat steps two and three until you’re happy with the results. Remember, it’s better to err on the side of caution when shrinking clothes. You can always shrink them further, but you can’t un-shrink them!
Conclusion
In conclusion, there are a few different ways that you can go about shrinking your baseball pants. You can either wash them in hot water, put them in the dryer on high heat, or soak them in hot water for a period of time. Whichever method you choose, make sure to carefully read the care instructions on your pants to avoid damaging them.
