How to Put a Tennis Ball on a String
Contents
A step by step guide on how to put a tennis ball on a string.
Introduction
In this guide, we’ll show you how to put a tennis ball on a string. You’ll need a few supplies before you get started. Firstly, you’ll need a tennis ball. You’ll also need some string, and a way to tie the string onto the tennis ball. Once you have all of your supplies, follow the steps below to get started.
Step One
Determine the amount of string needed. For a standard size tennis ball, you will need about four feet of string. Cut the string so that it is twice the desired length, plus an extra two inches. For example, if you want two feet of string hanging from the tennis ball, cut the string to six feet.
##Step Two
##Tie a large knot in one end of the string. The knot should be big enough that it will not fit through the hole in the tennis ball.
Step Two
Get a long, thin piece of string. The best kind to use is about 1/16th of an inch (1.6 mm) in diameter and made of nylon, although other types will work in a pinch. You’ll need about 2 1/2 feet (76 cm) for a regulation-size tennis ball. Cut the string with scissors, then tie a knot in one end.
Step Three
Now, take the other end of the string and tie it around the tennis ball. Make sure that the string is tight so that the ball doesn’t fall off.
Conclusion
In conclusion, putting a tennis ball on a string is not as difficult as it may seem. With a little practice, you should be able to do it quickly and easily. There are a few different methods that you can use, so find the one that works best for you.
